Converting measurements in inches divided to other units in decimal format and vice versa.

These converters are the dimensions in fractional form, for conversions between the various units in decimal format see: Conversion length.

Converting from fractional inches to decimal (fraz > dec).

Input value in fractions:

Feet (ft).

Inch (in).

Numerator of fraction.

Enumerator of fraction.

'

"

/

Decimal value and unit of output:

m dm cm mm yd ft in, inch mil

The input values can contain a number, a zero or nothing.
Examples: 1" 3/4 = 44.45 mm . . 63/64 = 25.003 mm . . 4" = 101.6 mm
' = feet (ft) . . . . " = inch (in) . . . . x/x = fraction.

Conversion from decimal to fractional inches (dec > frac).

Decimal value and unit of input:

m dm cm mm yd ft in, inch mil

Output values in fractions:

Enable feet (ft)

Lower value

mil

Exact value

Higher value

mil

The mil (thousandths of an inch) are the positive or negative difference compared to the actual value of the converted input.
Examples:
22.225 mm = 7/8
22 mm = 55/64 -6.767 mil.
' = feet (ft) . . . . " = inch (in) . . . . x/x = fraction.

The conversion from decimal to fractional inches (frac > dec) accepts any input fraction.

The conversion from decimal units to fractional inches (dec > frac) is usable with the following standard fractions for measurements in inches :
1/64, 1/32, 3/64, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64, 1/2, 33/64, 17/32, 35/64, 9/16, 37/64, 19/32, 39/64, 5/8, 41/64, 21/32, 43/64, 11/16, 45/64, 23/32, 47/64, 3/4, 49/64, 25/32, 51/64, 13/16, 53/64, 27/32, 55/64, 7/8, 57/64, 29/32, 59/64, 15/16, 61/64, 31/32, 63/64.